Strategic Systems Programs Office ELECTRICAL ENGINEER in Bangor, Washington

Job Overview

Job Overview
Summary

About the Agency

The selectee for this position will serve as an ELECTRICAL ENGINEER, within the Crane Engineering Division, Technical Department, STRATEGIC WEAPONS FACILITY PACIFIC.

Duties

The successful selectee will perform the following duties:

  • Developing and maintaining procedures for testing and evaluation of cranes and other moving equipment.
  • Planning, evaluating and advising on activities involving electrical engineering systems, (cranes, and other moving equipment) to ensure contract work complies with specifications.
  • Establishing objectives and completing investigations in order to successfully complete projects meeting program objectives.
  • Recommending design layouts, changes and upgrades relating to electrical engineering systems for compliance to requirements and specifications.
  • Monitoring and evaluating Strategic Systems Programs (SSP) contractor operations for compliance with technical contract requirements for Strategic Weapons Facility, Pacific (SWFPAC) and external directives.
Supervisory Status

No

Promotion Potential

3

Travel Required
  • Occasional Travel
  • You may be expected to travel for this position.
Relocation Authorized
  • Yes
  • Relocation incentives as described in 5 USC 5753 may be authorized in accordance with applicable travel regulations.
Who May Apply
This job is open to…

Current Permanent Competitive Service DON Employees, Reinstatement Eligibles, VEOA, or ICTAP

Questions? This job is open to 2 groups.

Job Requirements

Job Requirements
Key Requirements
  • Must be a US Citizen.
  • Males must be registered or exempt from Selective Service. www.sss.gov
  • Must be determined suitable for federal employment.
  • Must participate in the direct deposit pay program.
  • May be required to successfully complete a probationary/trial period.
  • See Other Information and Requirements section for additional requirements.
Qualifications

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the curriculum must: (1) lead to a bachelor's degree in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET)as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics; or electronics.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT) , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org.

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under in the first option for meeting the Basic Education Requirement. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in in the first option for meeting the Basic Education Requirement.

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, (e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology) may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. NOTE: If you qualify under this option, you must provide a copy of your engineering training plan, OR identify where in your resume you've documented several years of prior professional engineering type experience. Additionally, you must indicate where you worked and the name of your supervisor when you gained your professional engineering experience acquired under professional engineering supervision and guidance.

In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of experience at or equivalent to the NH-02, (GS-11) grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following:* providing electrical engineering services with design overview for digital or analog industrial motion control systems.*

OR, I have a Ph.D. or equivalent doctoral degree; OR, I have successfully completed three years of progressively higher level graduate education leading to a Ph.D. degree; OR,I have a combination of education and experience as described above that equates to one year of experience.

Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

You will receive credit for all qualifying experience, including volunteer and part time experience. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education:

Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States. It is the responsibility of the applicant to provide such evidence when applying for further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html. If you are using education to meet all or part of the qualification requirements, you must submit a copy of your transcripts or an itemized list of college courses which includes equivalent information from the transcript (course title, semester/quarter hours, and grade/degree earned) in your resume. See OPM's General Policies for information on crediting education.

See the Office of Personnel Management's General Policies for information on crediting education.

Requirements:

Generally, current Federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. All qualifications and time-in-grade requirements must be met by the closing date of this announcement and clearly documented in your resume.

Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.

Must be able to obtain an interim and/or final secret security clearance prior to entrance on duty AND must be able to maintain the required level of clearance while employed in the subject position. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA) and requires additional education, training and experience. This position has been identified as a Career Field-Engineering (S) at Level II. If you possess DAWIA Certification, please indicate your Certification Level and Career Field information in your resume. Selectee will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.

Successful completion of a pre-employment drug test is required. A tentative offer of employment will be rescinded if the applicant fails to report to the scheduled drug test appointment. Incumbents of drug testing designated positions will be subject to random testing. Drug test results will be provided to the employing activity/command.

Security Clearance

Secret

Additional Information

Additional Information
What To Expect Next

When the application process is complete, your application will be reviewed to determine if you meet the hiring eligibility and qualification requirements for which you requested consideration. You will be rated based on the information provided in your resume and responses to the questionnaire, along with your supporting documentation to determine your level of knowledge, skill, and ability related to the job requirements.

Best qualified applicants will be referred to the hiring manager. The hiring manager may choose to conduct interviews. Once the selection is made, you will receive a notification of the decision.

Stay informed of changes to your application status by signing up for automatic email alerts at https://www.usajobs.gov/Applicant/Application/ListApplications.

BENEFITS

Review our benefits

Other Information

This position is covered by the Department of Defense Priority Placement Program.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

The Department of the Navy uses E-Verify to confirm the employment eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify.

If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf

ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating of 85 or higher. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/

Recruitment incentives may be authorized to eligible new hires. Relocation incentives may be authorized.

This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/GetJob/ViewDetails/474476700. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.

Open & closing dates: 2017-07-17 to 2017-07-24

Salary: $77,926 to $120,461 / per year

Pay scale & grade: NH 3

Series: 0850 Electrical Engineering

Appointment type: Permanent

Work schedule: Full-Time

Job announcement number: ST-10024597-17-JLI

Control number: 474476700